Total Sediment Tester by Zematra B.V.
The Zematra Total Sediment Tester is an advanced device designed to quantify insoluble substances in both distillate and residual fuel oils. It adheres to the standards set by ASTM D4870, IP375, and ISO 10307. This bench model is available in two, four, or six-position configurations and is equipped with a vacuum circuit, complete with a gauge and a cooling/heating system to ensure optimal performance and efficiency.
The tester can determine total sediment content up to 0.40% m/m for distillate fuels and 0.50% m/m for residual fuels, covering a viscosity range of up to 55 cSt at 100°C. To enhance testing capabilities, optional accessories like sintered brass discs that support the microfiber filters are available. Additionally, we provide complementary equipment such as a vacuum pump, steam generator, waste container, thermometer, and balance, creating a complete testing system.
To meet specific testing needs, we offer a separate aging bath for thermal sample treatment, following test method guidelines. Available in six or fifteen positions, it allows efficient, simultaneous processing of multiple samples.
Tubos polarímetros, embudo de llenado central
U-50 Comprobador de calidad del agua multiparamétrico Horiba
Capacidad para medir y visualizar simultáneamente hasta 11 parámetros con un solo dispositivo.
El Multi Checker serie U-50 es un comprobador de calidad del agua apto para uso en campo que integra varios sensores en una sola sonda, lo que permite la medición simultánea de hasta 11 parámetros en una sola prueba. El diseño del instrumento facilita su uso en mediciones de campo y cuenta con diversas funciones y capacidades. Puede ser utilizado fácilmente por cualquier persona en diversas aplicaciones, como aguas fluviales, subterráneas y residuales, donde se requiere la medición y el análisis de la calidad del agua.
X-ACT 5000 Automatic Tube Pump Draegër
X-ACT 5000 Automatic Tube Pump
The automatic tube pump Draeger X-act 5000 is the first all-in-one solution designed for measurements with Draeger Short-term Tubes and for Sampling Tubes and Systems. Ease of operation and a high degree of reliability compliment the measurement and sampling of gases, vapors and aerosols. Includes:- X-ACT 5000
- Shoulder Strap
- Rechargeable Battery, NiMH, T4
- Wall Charger 100 – 240 VAC
Yamato DKL Series Basic and Economical Forced Convection Oven
Yamato DX Series Economical Natural Convection Ovens
DX302C/312C/402C/412C/602C/612C
Performance and functions
- Economical and cost saving
- Easy to use and maintain
- Excellent temperature accuracy
- Digital PID controller for easy operation with options for Fixed setting, Auto Start, Quick Auto Stop and Auto Stop
- Increased safety and self-diagnostic functions
- Calibration off-set function
Safety features
- Temp sensor error, Temp input circuit error, Auto overheat prevention, measured temp error, Circuit breaker with over current protection.
Yamato FO Series 1.5 to 9L Programmable Muffle Furnaces
Reliable, consistent high heat.
Avoid delays and save time at work with Yamato’s standard lab muffle furnaces. Our muffle furnace models are a cut above the rest because of their capacity to supply reliable, consistent high heat. We made sure to add top-quality parts that sustain high-temperature uniformity for your applications. Our standard units have energy-saving ceramic fiber as the internal material, an iron-chrome wire heater, and tightly sealed doors, which is highly beneficial when the maximum temperature exceeds 1000°C. Not only that, but they also have microprocessor-controlled thermoregulators, which provide outstanding repeatability. Whether you’re doing heat treatments or quality control, you can rely on our multi-capacity Yamato FO series programmable muffle furnaces:-
- Yamato FO Series 1.5 to 9L Programmable Muffle Furnaces
Yamato FO Series 11.3 to 30L Programmable Muffle Furnaces
FO510CR/610CR/710CR/810CR
Reliable, consistent high heat.
Avoid delays and save time at work with Yamato’s standard lab muffle furnaces. Our muffle furnace models are a cut above the rest because of their capacity to supply reliable, consistent high heat. We made sure to add top-quality parts that sustain high-temperature uniformity for your applications. Our standard units have energy-saving ceramic fiber as the internal material, an iron-chrome wire heater, and tightly sealed doors, which is highly beneficial when the maximum temperature exceeds 1000°C. Not only that, but they also have microprocessor-controlled thermoregulators, which provide outstanding repeatability. Whether you’re doing heat treatments or quality control, you can rely on our multi-capacity Yamato FO series programmable muffle furnaces:- Yamato FO Series 1.5 to 9L Programmable Muffle Furnaces
- Yamato FO Series 11.3 to 30L Programmable Muffle Furnace
