NewLab 100 Cloud Point
NewLab 300 Pour Point
ASTM D97 - ASTM D5853 - ASTM D5950 - ASTM D6074 - ASTM D6158 IP 15 - IP 441 ISO 3016 EN ISO 22995
Pour Point of petroleum products, crude oils, motor and engine oils, additives, lubricating oils, …Measuring Pour Point Principle
According to the methods, the sample is cooled down at a specified rate and, at the prescribed temperature intervals, the mechanical arm of the analyser lifts the test jar from the cooling jacket and tilts it in order to bring it in horizontal position to test the flow of the product. The sample movement is detected by the thermal probes (PT100 detection) placed above the sample surface which react if touched by the cooled sample.
NewLab 200 CFPP Cold Filter Plugging Point
ASTM D6371 IP 309 EN 116 - EN 16329
Correlated:
IP 419
Cold Filter Plugging Point of diesel, biodiesel and heating fuels.Measuring CFPP Principle
The sample is cooled down according to the methods and when the preselected temperature is reached a vacuum of 20 mBar is automatically applied to the sample. The product is sucked through the filter into the calibrated aspiration pipette. If the sample takes more than 60 seconds to reach the upper barrier detector (during the aspiration phase), or it fails to return completely into the test jar before that the product has cooled by a further 1°C, the Cold Filter Plugging Point is reached.
Hojas de Mylar
Lufkin Certified Tape on Frame Assemblies w/ Graduated Plumb Bob (Certificate Included)
U-50 Comprobador de calidad del agua multiparamétrico Horiba
Capacidad para medir y visualizar simultáneamente hasta 11 parámetros con un solo dispositivo.
El Multi Checker serie U-50 es un comprobador de calidad del agua apto para uso en campo que integra varios sensores en una sola sonda, lo que permite la medición simultánea de hasta 11 parámetros en una sola prueba. El diseño del instrumento facilita su uso en mediciones de campo y cuenta con diversas funciones y capacidades. Puede ser utilizado fácilmente por cualquier persona en diversas aplicaciones, como aguas fluviales, subterráneas y residuales, donde se requiere la medición y el análisis de la calidad del agua.
X-ACT 5000 Automatic Tube Pump Draegër
X-ACT 5000 Automatic Tube Pump
The automatic tube pump Draeger X-act 5000 is the first all-in-one solution designed for measurements with Draeger Short-term Tubes and for Sampling Tubes and Systems. Ease of operation and a high degree of reliability compliment the measurement and sampling of gases, vapors and aerosols. Includes:- X-ACT 5000
- Shoulder Strap
- Rechargeable Battery, NiMH, T4
- Wall Charger 100 – 240 VAC
