Tubos polarímetros, embudo de llenado central

Tubos de polarímetro de inversión Vidrio, de aproximadamente 9 mm de diámetro interior, con casquillo metálico roscado, sellado con litargirio

U-50 Comprobador de calidad del agua multiparamétrico

$0.00
Capacidad para medir y visualizar simultáneamente hasta 11 parámetros con un solo dispositivo. El Multi Checker serie U-50 es un comprobador de calidad del agua apto para uso en campo que integra varios sensores en una sola sonda, lo que permite la medición simultánea de hasta 11 parámetros en una sola prueba. El diseño del instrumento facilita su uso en mediciones de campo y cuenta con diversas funciones y capacidades. Puede ser utilizado fácilmente por cualquier persona en diversas aplicaciones, como aguas fluviales, subterráneas y residuales, donde se requiere la medición y el análisis de la calidad del agua.

U-Visc viscosímetro cinemático

Sistemas de viscosidad automáticos de amplio rango para lubricantes y otros productos derivados del petróleo

“El U-Visc es un sistema de viscosidad que fue diseñado en completa conformidad con la norma ASTM D445, combinada con un bajo consumo de solvente, alto rendimiento desatendido, facilidad de uso y confiabilidad” Este producto cumple con los siguientes métodos de prueba:
  •  ASTM D445
  •  ASTM D446
  •  ASTM D2270
  •  DIN 3104
  •  DIN 3105
  •  IP 71

X-ACT 5000 Automatic Tube Pump

X-ACT 5000 Automatic Tube Pump

The automatic tube pump Draeger X-act 5000 is the first all-in-one solution designed for measurements with Draeger Short-term Tubes and for Sampling Tubes and Systems. Ease of operation and a high degree of reliability compliment the measurement and sampling of gases, vapors and aerosols. Includes:
  • X-ACT 5000
  • Shoulder Strap
  • Rechargeable Battery, NiMH, T4
  • Wall Charger 100 – 240 VAC

Yamato DKL Series Basic and Economical Forced Convection Oven

DKL301C/311C/401C/411C/601C/611C​ Performance and functions Fixed temperature, Quick auto stop, Auto stop, and Auto start operating modes with easy control capabilities

Yamato DR201 Programmable High Temp Natural Convection Oven

Programmable natural convection oven with high accuracy control at high temperature range

Model DX302C DX312C DX402C DX412C DX602C DX612C
Circulation method Natural convection
Operating temperature range Room temp. +5°C to 300°C Room temp. +5°C to 280°C
Temperature control accuracy ±1°C (at 300°C)
Temperature distribution accuracy ±10°C (at 300°C) ±10°C (at 280°C)
Maximum temperature reaching time ~45 min (Room temp. to 300°C) ~60 min (Room temp. to 300°C) ~80 min (Room temp. to 280°C)
Interior material Stainless steel
Exterior material Electro-galvanized steel sheet with melamine resin baking finish
Heat insulating material Glass wool
Heater Iron-chrome wire heater 0.9 kW Iron-chrome wire heater 1.36 kW Iron-chrome wire heater 1.36 kW
Exhaust port 33 mm I.D. x 2 pcs. (on top)
Temp. controller PID control by microprocessor
Temp. setting method Digital setting by ▲▼ key
Temp. display method Measurement temp. : Digital display by green LED / Setting temp. : Digital display by red LED
Timer 1 min. to 99 Hrs. 59 min. and 100 Hrs. to 999 Hrs. 50 min.
Operation function Fixed temperature, Quick auto stop, Auto stop, Auto start
Additional function Calibration off-set, Power failure compensation function, Key lock function
Heater circuit control SSR control
Sensor K-thermocouple
Safety device Self diagnostic functions (Temp. Sensor abnormal, Abnormal memory, Input temp. abnormal, Measured temp. abnormal, Automatic overheat prevention), Key lock function, Hydraulic independent overheat prevention device, Electric leakage breaker with over current protection
Internal dimensions W×D×H 300x310x300mm 450x410x400mm 600x510x500mm
External dimensions W×D×H 400x440x630mm 550x540x730mm 700x640x830mm
Internal capacity 28L 74L 153L
Shelf plate with standard load 15kg/piece 15kg/piece 15kg/piece
Shelf rest step number / pitch 6 steps / 35mm 9 steps / 35mm 12 steps / 35mm
Power source 50/60Hz AC115V 9.5A (with plug) AC220V 4.3A (no plug, round terminal) AC115V 14A (with plug) AC220V 6.4A (no plug, round terminal) AC115V 14A (with plug) AC220V 6.4A (no plug, round terminal)
Weight ~23kg ~38kg ~56kg
Included Accessories Stainless steel punching metal shelf plate 2pcs. / Shelf bracket 4pcs.

Yamato DVS Series Programmable Natural Convection Ovens

    • DVS402C/412C/602C/612C

      Operation and functions

      • Excellent temperature accuracy
      • Easy to use and maintain.
      • Equipped with a 6 pattern PID program controller with easy program settings (30 steps x 1, 15 steps x 2, 10 steps x 3)
      • Simultaneous display of set constant and measured temperature.
      • Quick Auto stop, Auto Stop, Auto Start operations.
      • Increased safety and self-diagnostic functions
      • Calibration off-set function

      Safety features

      • Self-diagnostic functions (Temp. sensor abnormal, Heater disconnection, Internal communication error, temperature input circuit abnormality, Automatic overheat prevention function, SSR-short), Overheat prevention, Electric leakage breaker with over current protection.
      Your choice of laboratory oven can have a big effect on your daily lab routines. Download Yamato’s Complete Guide To Buying The Perfect Lab Oven guide and discover how your everyday applications and facility requirements factor into choosing an oven that can provide the best results for your samples.

Yamato DX Series Economical Natural Convection Ovens

DX302C/312C/402C/412C/602C/612C

Performance and functions

  • Economical and cost saving
  • Easy to use and maintain
  • Excellent temperature accuracy
  • Digital PID controller for easy operation with options for Fixed setting, Auto Start, Quick Auto Stop and Auto Stop
  • Increased safety and self-diagnostic functions
  • Calibration off-set function

Safety features

  • Temp sensor error, Temp input circuit error, Auto overheat prevention, measured temp error, Circuit breaker with over current protection.
Your choice of laboratory oven can have a big effect on your daily lab routines. Download Yamato’s Complete Guide to Buying the Perfect Lab Oven guide and discover how your everyday applications and facility requirements factor into choosing an oven that can provide the best results for your samples.

Yamato FO Series 1.5 to 9L Programmable Muffle Furnaces

Reliable, consistent high heat.

Avoid delays and save time at work with Yamato’s standard lab muffle furnaces. Our muffle furnace models are a cut above the rest because of their capacity to supply reliable, consistent high heat. We made sure to add top-quality parts that sustain high-temperature uniformity for your applications. Our standard units have energy-saving ceramic fiber as the internal material, an iron-chrome wire heater, and tightly sealed doors, which is highly beneficial when the maximum temperature exceeds 1000°C. Not only that, but they also have microprocessor-controlled thermoregulators, which provide outstanding repeatability. Whether you’re doing heat treatments or quality control, you can rely on our multi-capacity Yamato FO series programmable muffle furnaces:
    • Yamato FO Series 1.5 to 9L Programmable Muffle Furnaces
 

Yamato FO Series 11.3 to 30L Programmable Muffle Furnaces

FO510CR/610CR/710CR/810CR

Reliable, consistent high heat.

​Avoid delays and save time at work with Yamato’s standard lab muffle furnaces. Our muffle furnace models are a cut above the rest because of their capacity to supply reliable, consistent high heat. We made sure to add top-quality parts that sustain high-temperature uniformity for your applications. Our standard units have energy-saving ceramic fiber as the internal material, an iron-chrome wire heater, and tightly sealed doors, which is highly beneficial when the maximum temperature exceeds 1000°C. Not only that, but they also have microprocessor-controlled thermoregulators, which provide outstanding repeatability. Whether you’re doing heat treatments or quality control, you can rely on our multi-capacity Yamato FO series programmable muffle furnaces:

YTD-3 Ferrous Debris Monitor Yateks

The YTD-3 Ferrous Debris Monitor provides rapid, quantitative analysis of ferromagnetic wear particles in oil by measuring the PQ index—a dimensionless value indicating particle content and size. Highly sensitive to larger particles, it complements elemental analysis to enhance fault detection.
The device features an intuitive interface, allowing users to choose detection methods, name data, or use default settings for quick analysis. Results are displayed in real time during testing. Samples are measured in a 4.5 ml special oil sample container with a matching conversion ring.